Unit Circle Glossary

Angle: A geometric figure formed by two rays sharing a common endpoint (the vertex) The measure of an angle is how far one ray (the terminal side) has been rotated from the other (the initial side). In standard position, the vertex is at the origin and the initial side lies along the positive x-axis

Cosecant: The cosecant function, denoted csc(θ), is the reciprocal of sine: csc(θ) = 1/sin(θ). On a circle of radius , one has csc(θ) = , so on the unit circle (where ) csc(θ) = 1/y Cosecant is undefined when sin(θ)=0 (e.g. at θ=0°,180° on the unit circle) because one would be dividing by zero.

Cosine: Cosine of an angle θ, denoted cos(θ), equals the x-coordinate of the corresponding point on the unit circle. In a right triangle, cos(θ) = adjacent/hypotenuse; equivalently on a circle of radius , cos(θ) = ​ (so on the unit circle cos(θ) = x). Cosine is an even function, meaning cos(−θ) = cos(θ)​ graphically it is symmetric about the y-axis.

Coterminal angles: Coterminal angles are angles that share the same terminal side when placed in standard position. They differ by whole multiples of full rotations. In practice, one finds coterminal angles by adding or subtracting 360° (or radians) to a given angle. For example, 30° and 390° are coterminal because .

Degree: A degree (symbol °) is a unit for measuring angles. A full circle is defined as 360°, so one degree is 1/360 of a complete rotation​. Degrees are commonly used in geometry and trigonometry; by definition 180° equals π radians.

Even function: An even function satisfies for all θ, which means its graph is symmetric about the y-axis​. In trigonometry, the cosine and secant functions are even: for example, cos(−θ) = cos(θ) and sec(−θ) = sec(θ)​ This symmetry reflects the fact that these functions have the same value for angles θ and −θ.

Initial side: The initial side of an angle is the fixed ray from which the angle is measured. By convention in standard position, the initial side lies along the positive x-axis​. The angle is then formed by rotating a second ray (the terminal side) away from this initial side.

Odd function: An odd function satisfies for all θ, meaning its graph has origin symmetry​. In trigonometry, sine, cosecant, tangent, and cotangent are odd functions (e.g., sin(−θ) = −sin(θ), tan(−θ) = −tan(θ))​ This reflects that these functions change sign when the angle’s direction is reversed.

Periodic function: A periodic function repeats its values after regular intervals. Formally, is periodic with period if for all ​. The sine and cosine functions are periodic with period (or radians) , meaning for all .

Period: The period of a function is the smallest positive interval after which the function’s values repeat. For example, sine and cosine each complete one full cycle when the angle increases by or radians​. In other words, the period of or is (or ), since those functions return to their starting values after that increase.

Quadrant: The coordinate plane is divided into four quadrants by the x- and y-axes. Quadrant I contains angles from 0° to 90°, Quadrant II from 90° to 180°, Quadrant III from 180° to 270°, and Quadrant IV from 270° to 360°. In Quadrant I all six basic trig functions (sin, cos, tan, and their reciprocals) are positive. In Quadrant II only sine (and cosecant) are positive, in Quadrant III only tangent (and cotangent) are positive, and in Quadrant IV only cosine (and secant) are positive.

Quadrantal angle: A quadrantal angle is one whose terminal side lies exactly on an axis in standard position. Common examples are 0°, 90°, 180°, 270°, etc. (or in radians , etc.)​ These angles have coordinates on the unit circle like (1,0), (0,1), (−1,0), (0,−1), so their sine and cosine values are 0 or ±1, and their tangent or cotangent may be undefined.

Radian: A radian is an angle measure based on the radius of a circle. One radian is defined as the angle subtended by an arc whose length equals the radius of the circle. Equivalently, (in radians) = (arc length) / (radius). A full circle has circumference , so it contains radians​. In particular, radians and radians​

Reference angle: The reference angle for a given angle is the acute angle formed between the terminal side of and the x-axis. It is always between 0° and 90° (0 and radians)​. Reference angles allow one to use known first-quadrant values to find trig values in other quadrants. For example, the reference angle for 150° is since the terminal side of 150° makes a angle with the x-axis​.

Secant: Secant, denoted sec(θ), is the reciprocal of cosine: sec(θ) = 1/cos(θ). Equivalently, on a circle of radius , sec(θ) = where (x,y) is the point on the circle at angle ​. On the unit circle (), this means sec(θ) = 1/x. Secant is undefined when cos(θ)=0 (for example at or ).

Sine: Sine of an angle , written sin(θ), is defined as the y-coordinate of the point where the terminal side intersects the unit circle. Equivalently, for a circle of radius , sin(θ) = ​, so on the unit circle sin(θ)=y. In right-triangle terms, sin(θ)=opposite/hypotenuse. The sine function is odd, meaning sin(−θ)=−sin(θ)​, which corresponds to symmetry about the origin. For example, and .

Special angle: Special angles are commonly used angles with easily remembered exact trig values. These include multiples of 30° and 45° (e.g. 30°, 45°, 60°) whose sine and cosine can be found via 45–45–90 or 30–60–90 triangles​. For instance, from a 30–60–90 triangle one finds and , and from a 45–45–90 triangle . Special angles on the unit circle thus have coordinates involving or .

Standard position: An angle is said to be in standard position when its vertex is at the origin of the coordinate plane and its initial side lies along the positive x-axis​. Positive angles open counterclockwise, and negative angles open clockwise from the initial side. In standard position, the terminal side (after rotation) determines the sine and cosine via its intersection with the unit circle.

Tangent: Tangent of an angle is defined as tan(θ) = sin(θ)/cos(θ). On the unit circle, this equals for the point on the circle at angle ​. Tangent can also be thought of as the slope of the radius line through that point. Tangent is positive when and have the same sign (Quadrants I and III) and negative otherwise

Terminal side: The terminal side of an angle is the ray obtained after rotation from the initial side. In standard position, once the angle is measured (positive or negative) from the positive x-axis, the rotated ray is the terminal side​. The terminal side of intersects the unit circle at .

Unit circle: The unit circle is the circle of radius 1 centered at the origin of the coordinate plane​. It is fundamental in trigonometry because for any angle (in standard position), the coordinates of the point where its terminal side meets the circle are ​. Key points include at and at , with other important points given by special angles. The equation of the unit circle is .